涂料层介电性能测试/涂料耐击穿电压的检测仪器设备

点击图片查看原图
 
单价: 42000.00元/
起订: 1
供货总量: 10000
发货期限: 自买家付款之日起 2 天内发货
所在地: 北京
有效期至: 长期有效
最后更新: 2020-04-06 00:49
浏览次数: 4564
询价
 
公司基本资料信息
详细说明
产品规格: 标准 产品数量: 100.00 台
包装说明: 木箱 价格说明: 不限
查看人数: 54 人 本页链接: http://info.b2b168.com/s168-75891002.html


北京智德创新仪器设备有限公司

一、涂料层介电性能测试/涂料耐击穿电压的检测仪器设备用途: I. use: ZJC-50KV电压击穿试验仪又称耐电压击穿强度试验仪、介电击穿强度试验仪、电气介电强度试验仪,采用计算机控制,通过人机对话方式,完成对绝缘介质的工频电压击穿,工频耐压试验。主要适用于固体绝缘材料如绝缘漆、树脂和胶、浸渍纤维制品、云母及其制品、塑料、薄膜复合制品、陶瓷和玻璃等介质在工频电压或直流电压下击穿强度和耐电压时间的测试;采用计算机控制,可对试验过程中的各种数据进行快速、准确的采集、处理,并可存取、显示、打印。 ZJC-50KV voltage breakdown tester also called high voltage tester, dielectric breakdown strength tester electrical breakdown strength, dielectric strength tester, controlled by computer, through the man-machine dialogue mode, the voltage breakdown insulation, power frequency withstand voltage test. Mainly applicable to solid insulating materials such as insulation paint, resin and rubber, impgnated fiber products, mica products, plastic film, and composite products, ceramic and glass medium in the frequency of the voltage or DC voltage breakdown strength and voltage withstand the test of time; controlled by computer, the various test data in the process of rapid, accurate data acquisition, processing, and storage, display and print. 二、依据标准: Two, according to standard: 1、GB1408.1-2006《绝缘材料电气强度试验方法》 1, GB1408.1-2006 "insulation material electrical strength test method" 2、GB1408.2-2006《绝缘材料电气强度试验方法? 2, "GB1408.2-2006 electrical strength of insulating materials test methods 第2部分:对应用直流电压试验的附加要求》 The second part: Additional requirements for the application of DC voltage test 3、GB/T1695-2005《硫化橡胶工频击穿电压强度和耐电压的测定方法》 3, GB/T1695-2005 "vulcanized rubber power frequency breakdown voltage, strength and voltage determination method" 4、ASTM D149《固体电绝缘材料工业电源频率下的介电击穿电压和介电强度的试验方法》 4, ASTM, D149 - Test methods for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials at mains frequencies 三、功能: Three, function: 1、试验过程中可动态绘制出试验曲线,试验的曲线可以多种颜色叠加对比。 1, the test curve can be drawn dynamically during the test process, and the curves can be compared with other colors. 2、可对试验数据进行编辑修改,灵活适用; 2, the experimental data can be edited and modified, flexible and applicable; 3、试验条件及测试结果等数据可自动存储; 3. The test conditions and test results can be stored automatically; 4、试验报告格式灵活可变,适用于不同用户的不同需求; 4, the test report format is flexible and variable, applicable to different needs of different users; 5、可对一组试验中曲线数据的有效与否进行人为选定; 5, can be a set of experiments in the curve data is valid or artificial selection; 6、试验结果数据可导入EXECL,WORD文档编辑; 6. Test result data can be imported into EXECL and edited by WORD document; 7、过电流保护装置有足够的灵敏度,能够保证试样击穿时在0.1S内切断电源; 7 、 overcurrent protection device has enough sensitivity, can guarantee the breakdown of the sample, cut off the power supply in 0.1S; 8、仪器运行的持久性: 仪器可连续运行使用,不需为保护仪器而定期停机。 8. The durability of instrument operation: the instrument can be used continuously without the need to stop for the purpose of protecting the instrument. 四、主要技术参数: Four, the main technical parameters: 1、输入电压:AC 220V 1 、 input voltage: AC 220V 2、输出电压AC: 0~50KV;DC:0~50KV 2 、 output voltage AC:0 ~ 50KV; DC:0 to 50KV 3、输出功率:5KVA 3 、 output power: 5KVA 4、测量范围:?0KV~50KV 4, measurement range: 0KV ~ 50KV 5、电压测量误差:≤ 2% 5, voltage measurement error is less than 2%. 6、升压速率:0.1kV/s ~10 kV/s 6, step up rate: 0.1kV/s ~ 10 kV/s 7、耐压试验电压:10~50KV连续可调 7, voltage test voltage: 10 ~ 50KV continuous adjustable 8、耐压时间:?0~4H(无电流导通情况下) 8, pssure time: 0 ~ 4H (no current situation) 9、电源:220V±10%的单相交流电压和50Hz±1%的频率 9, power supply: 220V + 10% single-phase AC voltage and 50Hz + 1% frequency 10、电源电压稳定度外界电源电压波动≤10% 10, the power supply voltage stability of the external power supply voltage fluctuation is less than or equal to 10% 11、长×宽×高700mm×800mm×1650mm 11, X * w * 700mm * 800mm * 1650mm 12、设备自重:100kg 12, equipment weight: 100kg 13、运行环境温度:15 ~ 30℃,相对湿度:30%~85%能够稳定运行。 13, the operating environment temperature: 15~30 degrees, relative humidity: 30% ~ 85%, can be stable operation. 14、接地要求仪器需要单独接地,接地附合国家标准要求 14. Grounding requires that the instrument needs to be grounded separately, and the ground meets the requirements of the national standard 15、接地电阻要求≤4Ω(用户实验室自行准备) 15, grounding resistance less than 4 ohm (user laboratory pparation) 四、主要配置: Four, the main configuration: 序号 名称 单位/数量 Serial name unit / quantity 1 50KV主机 一台 1 50KV host one 2 等直径电极+电极支架 25mm二个,75mm一个 2 equal diameter electrode + electrode bracket 25mm two, 75mm one 3 平行板电极 一套 3 parallel plate electrode set 4 球形电极 一套 4 sets of spherical electrodes 5 线材电极 一套 5 wire electrode set 6 平板电极 一套 6 flat plate electrode set 7 圆锥电机 一套 7 cone motor set 8 PLC控制及升压系统 一套 8 PLC control and step-up system 10 松下步进电机 一套 10 Panasonic stepper motor set 11 西门子采集系统 一套 11 SIEMENS acquisition system 12 放电系统 一套 12 a set of discharge systems 13 控制软件 一套 13 control software set 14 进口松叶电压及电流采集系统 一套 14 imported pine needles of voltage and current collection system 15 联想启天计算机+打印机 一套 15 Lenovo Qitian + a computer printer 16 油槽 一只 16 oil tank one 17 绝缘油 20L 17 insulating oil 20L 18 绝缘手套 一双 18 insulated gloves, one pair 19 绝缘胶垫 2m*1.5m 19 insulation pad 2m*1.5m 五、安全说明: Five. Safety instructions: 1、要安装单独的保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。 1, to install a separate protective ground wire, mainly to reduce the sample when the breakdown of the surrounding strong electromagnetic interference. Computer control can also be avoided. 2、直流试验放电保护功能:在设备做完直流试验时,当开启试验门时设备会自动保护,直至使用设备上的放电装置放电后保护会自动取消.(注:因为直流试验后不放电会危险到人身安全,不能直接拿取电极,起到提醒使用人员放电以免造成伤害)。 2, DC discharge protection function: test equipment in DC test finished, the device will automatically open the door when the protection test device, discharge device after discharge until the use of protection will be automatically canceled. (Note: because the DC test not put electricity danger to personal safety, can not directly take to remind the use of electrodes. Discharge of personnel so as to avoid injury). 3、增配试验手动放电装置,随主机为一体化,当直流试验过程中突然断电,可采用手动放电进行放电,保证试验人员的人身安全。 3, equipped with a manual test discharge device, with the host for the integration, when sudden power DC test process, can adopt manual discharge discharge, ensure the personal safety of testing personnel. 4、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电保护等。 4 、 the circuit of the test equipment has a number of protective measures, including over-current protection, voltage loss protection, leakage protection, short-circuit protection, DC test, discharge protection and so on. 5、六级高压安全断电控制: 5, six high voltage safety power-off control: 5.1、总电源开关 5.1 、 total power switch 5.2、高压断电开关(钥匙开关) 5.2 、 high voltage power off switch (key switch) 5.3、调压器复位开关 5.3 、 regulator reset switch 5.4、试验箱门安全开关 5.4 、 test box door safety switch 5.5、高压变压器输入端限流空开 5.5, high voltage transformer input limit open flow 5.6、漏电保护开关 5.6 、 leakage protection switch

更多>本企业其它产品
涂料层介电性能测试/涂料耐击穿电压的检测仪器设备
0相关评论
Copyright © 2017-2020  中国涂料网  版权所有  
Powered By DESTOON 粤ICP备10089450号

工商网监标识